Yamaha TMAX XP530E-A 2017 Service Manual page 109

1. Rear brake lock caliper
2. Rear brake lock cable
3. Holder
4. Rear brake hose (hydraulic unit to rear brake
caliper)
5. Swingarm (right)
6. Clamp
7. Rear brake caliper
8. Rear wheel sensor lead
9. Rear brake disc
10.Bracket
11.Rear frame
12.Stay
A. Install the holder with the rotation stopper in
contact with the swingarm.
B. Install the clamp with the clamp in contact
with the protector end of the rear wheel sen-
sor lead.
C. Install the rear brake hose with the rear brake
hose in contact with the stopper of the rear
brake caliper.
D. Route the rear brake lock cable between the
brackets.
E. Route the rear brake hose through the guide
portion of the stay.
F. Fasten the rear brake hose and rear wheel
sensor lead with the clamp so that the rear
wheel sensor is located on the left side.
2-62
CABLE ROUTING