Checking the signaling system
The horn fails to sound.
1. Check the horn switch.
Refer to "CHECKING THE
SWITCHES" on page 8-221.
OK
2. Check the entire signaling system's
wiring.
Refer to "CIRCUIT DIAGRAM" on
page 8-35.
OK
Replace the horn or remote control
unit.
The tail/brake light fails to come on.
1. Check the front brake light switch.
Refer to "CHECKING THE
SWITCHES" on page 8-221.
OK
2. Check the rear brake light switch.
Refer to "CHECKING THE
SWITCHES" on page 8-221.
OK
3. Check the entire signaling system's
wiring.
Refer to "CIRCUIT DIAGRAM" on
page 8-35.
OK
Replace the tail/brake light assembly
or remote control unit.
The turn signal light, turn signal indicator light or both fail to blink.
1. Check the turn signal switch.
Refer to "CHECKING THE
SWITCHES" on page 8-221.
OK
2. Check the hazard switch.
Refer to "CHECKING THE
SWITCHES" on page 8-221.
OK
3. Check the turn signal/hazard relay.
Refer to "CHECKING THE RE-
LAYS" on page 8-233.
OK
The horn switch is faulty. Replace the han-
dlebar switch (left).
NG
Properly connect or replace the wire har-
ness.
NG
Replace the front brake light switch.
NG
Replace the rear brake light switch.
NG
Properly connect or replace the wire har-
ness.
NG
The turn signal switch is faulty. Replace
the handlebar switch (left).
NG
The hazard switch is faulty. Replace the
handlebar switch (right).
NG
Replace the turn signal/hazard relay.
NG
8-42
SIGNALING SYSTEM