Yamaha TMAX XP530E-A 2017 Service Manual page 260

is used for the rebound operation and left
side for the compression. Pay attention not
to mistake the right and left.
TIP
The left side (for the compression) damper rod
assembly has the holes "a" of oil path, unlike the
right side.
A
B
A. Compression side
B. Rebound side
ECA14210
NOTICE
Allow the damper rod assembly to slide
slowly down the inner tube until it protrudes
from the bottom of the inner tube. Be careful
not to damage the inner tube.
9. Tighten:
• Damper rod assembly bolt "1"
Damper rod assembly bolt
23 N·m (2.3 kgf·m, 17 lb·ft)
LOCTITE®
TIP
While holding the damper rod assembly with the
damper rod holder "2", tighten the damper rod
assembly bolt.
Damper rod holder (ø27)
90890-01423
Damping rod holder
YM-01423
a
2
10.Install:
• Rod puller "1"
• Rod puller attachment (M10) "2"
(onto the damper rod "3")
Rod puller
90890-01437
Universal damping rod bleeding
tool set
YM-A8703
Rod puller attachment (M10)
90890-01436
Universal damping rod bleeding
tool set
YM-A8703
11.Fill:
• Front fork leg
(with the specified amount of the recom-
mended fork oil)
Recommended oil
Yamaha Suspension Oil 01
Quantity (left)
447.0 cm³ (15.11 US oz, 15.77
Imp.oz)
Quantity (right)
437.0 cm³ (14.77 US oz, 15.41
Imp.oz)
ECA14230
NOTICE
• Be sure to use the recommended fork oil.
Other oils may have an adverse effect on
front fork performance.
4-93
FRONT FORK
1