Drive Mode Display (Xp530-A, Xp530D-A); V-Belt Replacement Indicator “V-Belt”; Oil Change Indicator “Oil”; Function Display - Yamaha TMAX XP530E-A 2017 Service Manual

TIP
Consider the following tips to reduce fuel con-
sumption:
• Avoid high engine speeds during acceleration.
• Travel at a constant speed.

Drive mode display (XP530-A, XP530D-A)

1. Drive mode display
This display indicates which drive mode has
been selected: "S" sporty or "T" touring.
V-belt replacement indicator "V-Belt"
1. V-belt replacement indicator "V-Belt"
This indicator flashes every 20000 km (12500
mi) when the V-belt needs to be replaced.
After changing the V-belt, reset the V-belt re-
placement indicator. To reset the V-belt replace-
ment indicator, refer to "Setting mode" on page
1-16.
If the V-belt is changed before the V-belt re-
placement indicator "V-Belt" flashes (i.e. before
the periodic V-belt change interval has been
reached), the indicator "V-Belt" must be reset af-
ter the V-belt change for the next periodic V-belt
change to be indicated at the correct time.
Oil change indicator "Oil"
1
1. Oil change indicator "Oil"
This indicator flashes at the initial 1000 km (600
mi), then at 5000 km (3000 mi) and every 5000
km (3000 mi) thereafter to indicate that the en-
gine oil should be changed.
After changing the engine oil, reset the oil
change indicator. To reset the oil change indica-
tor, refer to "Setting mode" on page 1-16.
If the engine oil is changed before the oil change
indicator "Oil" flashes (i.e. before the periodic oil
change interval has been reached), the indicator
"Oil" must be reset after the oil change for the
next periodic oil change to be indicated at the
correct time.
1

Function display

Push the "MENU" switch for one second to
switch the display between the windshield ad-
justing function, grip warmer adjusting function,
seat heater adjusting function, and information
display selection function.
TIP
• For XP530D-A: The windshield adjusting func-
tion, grip warmer adjusting function, seat heat-
er adjusting function can be selected.
• For XP530E-A, XP530-A: The grip warmer and
seat heater requires an accessory part and
cannot be selected.
Adjusting the windshield position
To move the windshield up, push the "
the select switch. To move the windshield down,
1-13
FEATURES
1
" side of