Yamaha TMAX XP530E-A 2017 Service Manual page 244

Yamaha diagnostic tool USB
90890-03256
Yamaha diagnostic tool (A/I)
90890-03254
1
6. Start the Yamaha diagnostic tool and display
the diagnosis of function screen.
7. Select code No. 1, "ABS reaction-force con-
firmation".
8. Click "Actuator Check" "1", and then operate
the front brake lever "2" and rear brake lever
"3" simultaneously.
TIP
• The hydraulic unit operates 1 second after the
front brake lever and rear brake lever are oper-
ated simultaneously and continues for approx-
imately 5 seconds.
• The operation of the hydraulic unit can be con-
firmed using the indicator.
On: The hydraulic unit is operating.
Flashing: The conditions for operating the hy-
draulic unit have not been met.
Off: The front brake lever and rear brake lever
are not being operated.
1
ABS (Anti-lock Brake System)
9. A reaction-force pulsating action is generated
in the front brake lever "1" and continues for a
few seconds.
TIP
• The reaction-force pulsating action consists of
quick pulses.
• Be sure to continue operating the front brake
lever and rear brake lever even after the pul-
sating action has stopped.
• "ON" and "OFF" on the tool screen indicate
when the brakes are being applied and re-
leased respectively.
1
10.After the pulsating action has stopped in the
front brake lever, it is generated in the rear
brake lever "1" and continues for a few sec-
onds.
TIP
• The reaction-force pulsating action consists of
quick pulses.
• Be sure to continue operating the front brake
lever and rear brake lever even after the pul-
sating action has stopped.
• "ON" and "OFF" on the tool screen indicate
when the brakes are being applied and re-
leased respectively.
4-77
2 3