Yamaha TMAX XP530E-A 2017 Service Manual page 599

7. Inputting the identification number is done by counting the number of flashes of the smart key system
indicator light " ".
For example, if the identification number is 123456:
Push and hold the Parking/Unlock switch.

The smart key system indicator light " " will start to flash.

Release the Parking/Unlock switch after the smart key system indicator light " " flashes once.

The first digit of the identification number has been set as "1".

Push and hold the Parking/Unlock switch again.

Release the Parking/Unlock switch after the smart key system indicator light " " flashes twice.

The second digit has been set as "2".

Repeat the above procedure until all digits of the identification number have been set. The smart key
system indicator light " " will flash for 10 seconds if the correct identification number was entered.
TIP
Emergency mode will be terminated when either one of the following situations apply. In this case, start
over again from step (4).
• When there are no Parking/Unlock switch operations for 10 seconds during the identification number
input process.
• When the smart key system indicator light " " is allowed to flash 10 or more times.
8. Push the ON/start switch while the smart key system indicator light " " is flashing to turn on the pow-
er to the vehicle. The engine can now be started.
TIP
• If the identification number is not correctly entered, the smart key system indicator light " " will flash
rapidly for 3 seconds and emergency mode is terminated. In this case, start over again from step (4).
• To lock the handlebar after turning on the vehicle in emergency mode, turn the vehicle power off, wait
30 seconds, and then turn the handlebar to the left and push the OFF/LOCK switch.
SMART KEY SYSTEM
8-208