Programming The Sipi For Static Addressing - Avaya S8400 Installing And Configuring

Chapter 6: IP interface configuration

Programming the SIPI for static addressing

You administer the static IP address for the circuit pack directly through the Ethernet port
connection on the faceplate. For more information, see
Figure 3: Connecting the laptop directly to the SIPI
1
cadlipsi KLC 031502
Figure notes:
1. Services laptop
2. PCMCIA Network Interface Card (NIC)
Note:
Ensure that you have the password before proceeding.
Note:
Depending on the operating system on the Services laptop computer, you might need to clear
the Address Resolution Protocol (ARP) cache before entering a new IP address. If you enter an
IP address and your computer cannot connect, try clearing the cache.
1. On your laptop computer, click Start > Run to open the Run dialog box.
2. Type command and press Enter to open a MS-DOS Command Line window.
50
Installing and Configuring the Avaya S8400 Media Server
Figure
2
3
3. NIC adapter cable (if necessary)
4. CAT5 crossover cable to SIPI
3.
CLK
4
February 2006
S
E
R
V
I
C
E
N
E
T
W
O
R
K