Programming The Sipi For Static Addressing - Avaya S8400 Installing And Configuring

Chapter 6: IP interface configuration

Programming the SIPI for static addressing

You administer the static IP address for the circuit pack directly through the Ethernet port
connection on the faceplate. See
Figure 4: Connecting the laptop directly to the SIPI
1
cadlipsi KLC 031502
Figure notes:
1. Services laptop computer
2. PCMCIA Network Interface Card (NIC)
Note:
Ensure that you have the password before proceeding.
Note:
Depending on the operating system on the Services laptop computer, you might need to clear
the Address Resolution Protocol (ARP) cache before entering a new IP address. If you enter an
IP address and your computer cannot connect, try clearing the cache.
1. On your laptop computer, click Start > Run to open the Run dialog box.
2. Type command and click OK to open a MS-DOS Command Line window.
42
Installing and Configuring the Avaya S8400 Media Server
Figure 4.
2
3
3. NIC adapter cable (if necessary)
4. CAT5 crossover cable to SIPI
CLK
S
E
R
V
I
C
E
N
E
T
W
O
R
K
4
February 2007