Figure 2.17 Power Supply Units Of Primepower650 Rack-Mount Type (8U) Server For Dual Power Feed - Fujitsu PRIMEPOWER850 User Manual

Note: For a dual power supply, all four power supply units are already installed.
Therefore, no additional power supplies are needed.
Figure 2.17 Power supply units of PRIMEPOWER650 rack-mount type (8U) server for
dual power feed
Equipment damage
The unit may malfunction if the PSUs are not hot swapped correctly. Contact a
certified service engineer before attempting to hot swap a PSU.
A software tool (Machine Administration Menus) included in the Enhanced Support
Facility is used to hot swap the power supplies (FEP) of the main unit. For a
description of hot swapping, refer to the Machine Administration Guide supplied with
the Enhanced Support Facility.
U41261-J-Z816-4-76
2.4 Adding Optional Internal Units
41