Fujitsu PRIMEPOWER850 User Manual page 48

CHAPTER 2 PRIMEPOWER650 Rack-mount Type (8U) Server
(4) UPS port (label: UPS0)
and
(5) UPS port (label: UPS1)
Dsub 9-pin connectors for connecting signal cables of an uninterruptible power
supply.The main unit has two UPS ports. Both ports are used for connecting power
cables in dual power feed mode.
(6) RCI port (label: RCI)
RJ11 connector for connecting an RCI cable or terminating resistor (supplied with the
main unit).
(7) LCI port (label: LCI)
Connector for connecting the LCI cable of an optional PCI slot expansion unit, or for
connecting an LCI loopback connector (supplied with the main unit).
(8) Serial port (label: SERIAL A)
Dsub 25-pin connector for connecting an RS-232C cable.
(9) Serial port (label: SERIAL B)
Dsub-25 pin connector for connecting an RS-232C cable. A certified service engineer
connects a maintenance console terminal to this port for unit maintenance. The
customer must not use this port.
(10) Keyboard port (label: KB)
8-pin DIN connector for connecting the keyboard cable.
(11) LAN port (label: ETHERNET)
RJ45 connector for automatically recognizing transmission speed (10 or 100 Mbps).
(12) PRIVATE (label: PRIVATE)
LAN port for maintenance. The customer must not use this port.
(13) CH-IF port (label: CH-IF)
Connector for connecting CH-IF cable of optional PCI slot expansion unit.
18 U41261-J-Z816-4-76