Converting A Standard Power Supply To A Redundant Power Supply - Fujitsu PRIMERGY TX1320 M5 Upgrade And Maintenance Manual

▶
"Resuming BitLocker functionality" on page
▶
"Performing a fan test" on page
6.3.2 Converting a standard power supply to a
redundant power supply
Field Replaceable Unit
(FRU)
Tools:
Phillips PH2 / (+) No. 2 screw driver
The standard power supply can be replaced by a redundant power supply. The
redundant power supply consists of up to two PSUs. The upgrade kit excludes
the PSU, the PSUs must be additionally ordered.
The upgrade kit for the redundant power supply consists of the following parts:
– PSU cage with power distribution board (incl. power cables)
– several screws
Preliminary steps
▶
"Suspending BitLocker functionality" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶ Remove the HDD fan modules, see
inch HDD variant)" on page 67
HDD variant)" on page
▶
"Removing the 2.5-inch HDD cage" on page 60
hot-plug HDDs" on page
▶
"Removing the expansion card" on page
▶
"Removing the defective system board" on page
TX1320 M5
100.
45.
"Removing the HDD fan module (2.5-
or "Removing the HDD fan module (3.5-inch
64.
143.
Upgrade and Maintenance Manual
Power supply unit (PSU)
91.
Hardware: 15 minutes
71.
46.
48.
or "Removing 3.5-inch non
203.
340.
109