CHAPTER 2 PRIMEPOWER650 Rack-mount Type (8U) Server
Either of the commands may be invalid, depending on the position of the MODE
switch.
Table 2.4
positions of the MODE switch.
Table 2.4 Validity of commands according to position of mode switch
Command
issued
RST
REQ
Use the operator panel as follows.
• To display the temperature of the air intake section (symbol T)
1
Press the Cursor switch until the underline cursor on the status display LCD
moves to symbol T, as shown below:
2
Press the Decision switch.
The intake-air temperature is displayed on the first line of the status display LCD.
12
indicates whether each command is valid or invalid for the different
LOCK
Invalid
Invalid
MODE switch position
UNLOCK
Invalid
Valid
MAINTENANCE
Valid
Valid
L
L
U41261-J-Z816-4-76