Fujitsu PRIMEPOWER850 User Manual page 45

• To perform a system reset or a system dump (symbol 0):
1
Press the Cursor switch until the underline cursor on the status display LCD
moves to symbol 0, as shown below:
If the Cursor switch remains pressed down when the underline cursor reaches the
rightmost position, the underline cursor jumps to the leftmost position.
2
Press the Decision switch.
The operation menu is displayed on the first line of the status display LCD.
REQ: Request Dump
RST: Reset
3
Select the Reset command or the Dump command.
• To reset the system:
1 Press the Cursor switch until
shown below:
Pressing the Cursor switch moves
press the Cursor switch cancels this operation, and the LCD display returns to the
state prior to its displaying of the operation menu.
U41261-J-Z816-4-76
2.2 Names and Functions of Components
<
on the status display LCD moves to RST, as
<
to REQ and RST, in this order. Continuing to
L
L
L
15