CHAPTER 3 PRIMEPOWER850 Rack-mount Type (16U) Server
• To perform a system reset or a system dump (symbol 0) :
1
Press the Cursor switch until the underline cursor on the status display LCD
moves to symbol 0, as shown below:
If the Cursor switch remains pressed down when the underline cursor reaches the
rightmost position, the underline cursor jumps to the leftmost position.
2
Press the Decision switch.
The operation menu is displayed on the first line of the status display LCD.
REQ:
Request Dump
RST:
Reset
3
Select the Reset command or the Dump command.
• To reset the system:
1
Press the Cursor switch until
shown below:
Pressing the Cursor switch moves
Continuing to press the Cursor switch cancels this operation, and the LCD
display returns to the state prior to its displaying of the operation menu.
64
<
on the status display LCD moves to RST, as
<
to REQ and RST, in this order.
L
L
L
U41261-J-Z816-4-76