Table 2.2 Meanings Of Operation Menu Symbols On Operator Panel; Table 2.3 Commands - Fujitsu PRIMEPOWER850 User Manual

(2) Using the operator panel
On the operator panel, select an operation menu symbol in the second line of the
display by pushing the Cursor switch, and then execute the selected operation by
pushing the Decision switch.
Table 2.2

Table 2.2 Meanings of operation menu symbols on operator panel

Symbol
T Temperature
Z AC input status
∗
Abnormal status (error)
0 System operation
Table 2.3
Command
Reset (RST)
Request (REQ) None (A command
U41261-J-Z816-4-76
- L: Mode switch status indication
-- L: Lock
-- U: Unlock
-- M: Maintenance
The cursor does not stop at the mode switch status indication symbol.
lists the meanings of the operation menu symbols on the operator panel.
Indication
Temperature of the air intake
section of the main unit
Status of the AC input section
An error occurred in the main unit This symbol is only
Used for system operation
commands (system reset or
operating system dump)
lists the control commands that are used from the operator panel.

Table 2.3 Commands

Parameter
None (A command
execution confirmation
message is output.)
execution confirmation
message is output.)
2.2 Names and Functions of Components
Explanation
Function
Reset request
OS dump request
Remarks
-
-
displayed if an error is
detected.
-
System behavior after
command is issued
The system is forcibly reset
and then restarted.
The OS dump information
of the system is collected,
and the operating system
enters the panic state.
11