Installing The Enhanced Support Facility Package - Fujitsu PRIMEPOWER850 User Manual

CHAPTER 3 PRIMEPOWER850 Rack-mount Type (16U) Server
5
Turn off all circuit breakers on the main unit.
Note: This switch is only provided if the redundant power supply or dual power
feed is supported.
3.3.6

Installing the Enhanced Support Facility package

Data destruction
Before using this product, always install the Enhanced Support Facility. If this
facility is not installed, a switch or status display LCD malfunction might occur and
destroy data.
The Enhanced Support Facility must always be installed in the PRIMEPOWER850
server to ensure operation of the high reliability functions of the service processor.
For more information, refer to the "Installation Guide" and "User's Guide" of the
Enhanced Support Facility.
82
(upper part)
Back of unit
Figure 3.12 Turning off the circuit breaker
Circuit breaker
Circuit breaker (Note)
U41261-J-Z816-4-76