Table 2.6 Mounting Pattern Of Memory Modules - Fujitsu PRIMEPOWER850 User Manual

CHAPTER 2 PRIMEPOWER650 Rack-mount Type (8U) Server
Group
Group A
Group B
Group C
Group D
DR: DIMM-RISER-CARD
Note: MSC stands for midrange system controller, and MSC0 and MSC1 are the
two system controllers which are mounted on the system board. Each MSC
controls half of the memory modules.
Group MSC0 MSC1
Group A O
Group B
Group C
Group D
Group MSC0 MSC1
Group A O O
Group B
Group C
Group D
Group MSC0 MSC1
O O
Group A
Group B O O
Group C O O
Group D
: Install a set of four memory modules.
O
Note 1: Memory modules must be installed as follows:
l Each group must consist of four memory modules.
l Memory modules in any one group must have the same capacity.
Note 2: The memory modules that are supported are 512MB-DIMM, 1GB-DIMM,
or 2GB-DIMM.
44
Controlled by MSC0
DR00 DR01
A00 A01
B00 B01
C00 C01
D00 D01

Table 2.6 Mounting pattern of memory modules

Group MSC0 MSC1
Group A O
Group B O
Group C
Group D
Group MSC0 MSC1
Group A O
O
Group B
Group C
Group D
Group MSC0 MSC1
O
Group A
Group B O
Group C O
Group D O
DR02 DR03 DR04
A02 A03 A04
B02 B03 B04
C02 C03 C04
D02 D03 D04
Group MSC0
Group A O
Group B O
O
Group C
Group D
Group MSC0
O Group A O
O
Group B
Group C
Group D
Group MSC0
O O
Group A
O Group B O
O Group C O
Group D O
Controlled by MSC1
DR05 DR06
A05 A06
B05 B06
C05 C06
D05 D06
MSC1 Group MSC0
Group A O
Group B O
O
Group C
Group D O
MSC1 Group MSC0
O Group A O
O O
Group B
Group C O
Group D
MSC1
O
O
O
O
U41261-J-Z816-4-76
DR07
A07
B07
C07
D07
MSC1
MSC1
O
O