Fujitsu PRIMEPOWER850 User Manual page 137

4.3 Preparing for PCIBOX Operation
• Connection to PRIMEPOWER850
Up to two PCIBOXes can be connected to a PRIMEPOWER850.
The following signal cables are attached to each unit:
l CH-IF cable (2 m) x 1
l LCI cable (3 m) x 1
An LCI cable that includes two connectors for PCIBOXes is supplied. If only one
PCIBOX is installed, one of the connectors is not used.
Use these signal cables and components to connect a PCIBOX to a
PRIMEPOWER850 as shown in Figure 4.5.
U41261-J-Z816-4-76 107