CHAPTER 2 PRIMEPOWER650 Rack-mount Type (8U) Server
2.2.2
Operator panel
This section identifies and describes the functions and operation of the operator panel.
2.2.2.1
Exterior view of the operator panel
Figure 2.3
(5) Cursor switch
(1) Status display LCD
Note:
Pressing a switch might cause display of a confirmation message on the
status display LCD. If this occurrs, confirm the displayed message, then
press the switch again.
(1) Status display LCD
The status display LCD shows a message or symbol during operation.
(2) POWER LED (green)
The POWER LED lights in green when the main unit power is turned on.
(3) CHECK LED (amber)
The CHECK LED lights in amber if an error occurs in the main unit.
6
shows the operator panel located on the front of the main unit.
(2) POWER LED (green)
Figure 2.3 Operator panel
(3) CHECK LED (amber)
(6) Decision switch
(7) Power switch
(4) Mode switch
U41261-J-Z816-4-76