Table of Contents
Advertisement
CHAPTER 2 PRIMEPOWER650 Rack-mount Type (8U) Server
• If the abnormal status symbol (symbol ∗) appears:
4The abnormal status indication (symbol
4For explanations of the displayed error messages, see
Messages Displayed on the Operator Panel."
1
Press the Cursor switch until the underline cursor on the status display LCD
moves to symbol
2
Press the Decision switch.
• If there is only one error
An error message is displayed on the first line of the status display LCD.
• If there are two or more errors
An error message is displayed on the first line of the status display LCD and 6 is
displayed in the last column.
To display the next error message, press the Cursor switch.
When the last error message is displayed,
14
∗
, as shown below:
∗
) is only displayed if an error occurs.
Section 7.3, "Error
L
L
L
<
is displayed in the last column of the line.
L
U41261-J-Z816-4-76
Advertisement
Table of Contents
