CHAPTER 2 PRIMEPOWER650 Rack-mount Type (8U) Server
4If the main unit employs software for automatic power control and the mode
switch is set to UNLOCK or LOCK, plugging a power cable into an outlet may
automatically turn on the power. To prevent such an occurrence, set the mode
switch to MAINTENANCE before plugging the power cable into the outlet.
Note:
Each power cable must always be connected to a 200-240 VAC grounded
outlet (complies with NEMA L6+5P).
Figure 2.10 Power cable connection of the PRIMEPOWER650 rack-mount type (8U)
server (with N+1 redundant configuration for direct 200 VAC power
connection to the power distribution panel)
• Connection to the power distribution box
Connect the main unit power cables to the power distribution box as shown in
2.11.
4If the main unit employs software for automatic power control and the mode
switch is set to UNLOCK or LOCK, plugging a power cable into an outlet may
automatically turn on the power. To prevent such an occurrence, set the mode
switch to MAINTENANCE before plugging the power cable into the outlet.
32
Figure
U41261-J-Z816-4-76