Table of Contents
Advertisement
CHAPTER 2 PRIMEPOWER650 Rack-mount Type (8U) Server
2
Press the Decision switch.
The confirmation message "RESET OK?" is displayed.
3
To perform a reset, press the Decision switch again. To cancel this operation,
press the Cursor switch instead of the Decision switch, and the LCD display
then returns to the state prior to its displaying of the operation menu.
• To request a system dump:
1
Press the Cursor switch until
shown below:
Pressing the Cursor switch moves
Continuing to press the Cursor switch cancels this operation, and the LCD
display returns to the state prior to its displaying of the operation menu.
2
Press the Decision switch.
The confirmation message "REQUEST OK?" is displayed.
3
To perform a dump of the operating system, press the Decision switch again.
To cancel this operation, press the Cursor switch instead of the Decision
switch, and the LCD display then returns to the state prior to its displaying of
the operation menu.
16
<
on the status display LCD moves to REQ, as
<
to REQ and RST, in this order.
L
L
L
U41261-J-Z816-4-76
Advertisement
Table of Contents
