Inserting A Cd-Rom / Dvd-Rom Disc; Ejecting A Cd-Rom / Dvd-Rom Disc - Fujitsu PRIMEPOWER850 User Manual

CHAPTER 5 Internal I/O Units
5.2.4

Inserting a CD-ROM / DVD-ROM disc

1
With the main unit's POWER LED lit, verify that the BUSY LED on the front
panel of the DVD-ROM drive is out.
2
Open the I/O cover at the front of the main unit.
3
Excute the Solaris Operating Environment eject command, or press the Eject
button.
The tray of the DVD-ROM drive comes out.
4
Place the CD-ROM / DVD-ROM disc on the tray.
5
Press the Eject button a second time.
The tray goes in, and the CD-ROM / DVD-ROM disc is mounted in the drive.
5.2.5

Ejecting a CD-ROM / DVD-ROM disc

1
If the system is running, verify that the disk is not in use by a user or a
program. If the CD-ROM / DVD-ROM disc is in use, the user process should
be stopped before ejecting the CD-ROM / DVD-ROM disc.
2
Open the I/O cover at the front of the main unit.
3
Execute the Solaris Operating Environment eject command, or execute the
"Eject disk" function of the Volume Manager.
The tray is ejected.
4
Remove the CD-ROM / DVD-ROM disc, then press the Eject button.
The tray goes in.
114 U41261-J-Z816-4-76