Video Port - Texas Instruments TMS320C64x DSP Reference Manual

Dsp video port/vcxo interpolated control (vic) port
Hide thumbs Also See for TMS320C64x DSP:
Table of Contents

Advertisement

Video Port

1.1 Video Port
The video port peripheral can operate as a video capture port, video display
port, or transport stream interface (TSI) capture port. It provides the following
functions:
-
-
1-2
Overview
Video capture mode:
J
Capture rate up to 80 MHz.
J
Two channels of 8/10-bit digital video input from a digital camera or
analog camera (using a video decoder). Digital video input is in YCbCr
4:2:2 format with 8-bit or 10-bit resolution multiplexed in ITU-R BT.656
format.
J
One channel of Y/C 16/20-bit digital video input in YCbCr 4:2:2 format
on separate Y and Cb/Cr inputs. Supports SMPTE 260M,
SMPTE 274M, SMPTE 296M, ITU-BT.1120, etc., as well as older
CCIR601 interfaces.
YCbCr 4:2:2 to YCbCr 4:2:0 horizontal conversion and ½ scaling in
J
8-bit 4:2:2 modes.
J
Direct interface for two channels of up to 10-bit or one channel of up to
20-bit raw video from A/D converters.
Video display mode:
J
Display rate up to 110 MHz.
J
One channel of continuous digital video output. Digital video output is
YCbCr 4:2:2 co-sited pixel data with 8/10-bit resolution multiplexed in
ITU-R BT.656 format.
J
One channel of Y/C 16/20-bit digital video output in YCbCr 4:2:2 format
on separate Y and Cb/Cr outputs. (Supports SMPTE 260M,
SMPTE 274M, SMPTE 296M, ITU-BT.1120, etc.)
J
YCbCr 4:2:0 to YCbCr 4:2:2 horizontal conversion and 2 scaling of
output in 8-bit 4:2:2 modes.
J
Programmable clipping of BT.656 and Y/C mode output values.
J
One channel of raw data output up to 20-bits for interface to RAM-
DACs. Two channel synchronized raw data output.
J
Synchronizes to external video controller or another video display port.
J
Using the external clock, the frame timing generator provides
programmable image timing including horizontal and vertical blank-
ing, start of active video (SAV) and end of active video (EAV) code
insertion, and horizontal and frame timing pulses.
J
Generates horizontal and vertical synchronization and blanking
signals and a frame synchronization signal.
SPRU629

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tms320c6000

Table of Contents