Channel; Receive Frequency; Transmit Frequency; Qt/Dqt Decode - Kenwood TK-3180 Function Reference

16 CONVENTIONAL GROUP

16.2 Channel

You can configure the following functions relating to the
Conventional Group Channel using KPG-89D.
•

Receive Frequency

•

Transmit Frequency

•

QT/DQT Decode

•

QT/DQT Encode

•

Channel Name

•

Transmit Power

• Wide/Narrow
•
Optional Signaling
•
Busy Channel Lockout
•
PTT ID
•
Beat Shift
•
Scan Add
•
Compander
• Data
• Voice Scrambler
• Scrambler Code
16.2.1 Receive Frequency
You can configure the receive frequency using KPG-89D.
!
Configuration using KPG-89D
•
Configuring the Receive Frequency (Refer to
FPRG 6.3.3 Receive Frequency.)
16.2.2 Transmit Frequency
You can configure the transmit frequency using KPG-
89D.
!
Configuration using KPG-89D
• Configuring the Transmit Frequency (Refer to
FPRG 6.3.4 Transmit Frequency.)
16.2.3 QT/DQT Decode
This function allows you to configure the QT/DQT decode
code. QT/DQT is the Signaling for facilitating
communication within a Group when sharing the same
channel with several groups (Talk Group).
QT/DQT Decode/Encode.)
You can configure the QT/DQT Decode code to each
channel using KPG-89D.
54
!
Configuration using KPG-89D
•
16.2.4 QT/DQT Encode
This function allows you to configure the QT/DQT Encode
code. QT/DQT is the Signaling for facilitating
communication within a Group when sharing the same
channel with several groups (Talk Group).
QT/DQT Decode/Encode.)
You can configure the QT/DQT Encode code to each
channel using KPG-89D.
!
Configuration using KPG-89D
•
16.2.5 Channel Name
This function allows you to assign a name to a Channel.
(Refer to 3.6.3 Channel Name.)
You can configure the Channel Name using KPG-89D.
!
Configuration using KPG-89D
•
16.2.6 Transmit Power
Transmit Power is the transmission power of the
transceiver. You can select Low when a repeater or the
receiving party is nearby.
This will extend the operating time of TK-2180/ 3180
becomes longer.
Press the PF Low Transmit Power key to switch the
transmit power (High/Low) of the transceiver.
You can configure the Transmit Power using KPG-89D.
Note: You can configure the PF Low Transmit Power key only in
!
Configuration using KPG-89D
•
•
(Refer to 18.1
Function Reference
Configuring the QT/DQT Decode (Refer to FPRG
6.3.5 QT/DQT Decode.)
Configuring the QT/DQT Encode (Refer to FPRG
6.3.6 QT/DQT Encode.)
Configuring a Channel Name (Refer to FPRG
6.3.7 Channel Name.)
TK-2180/ 3180.
Configuring the Transmit Power (Refer to FPRG
6.3.8 Transmit Power.)
Assigning functions to the PF keys (Refer to
FPRG 6.8 Key Assignment.)
(Refer to 18.1
Version: 1.11