Horn Alert; Switching The Horn Alert On/Off; Horn Alert Operation Using Option Signaling And Ltr Id; Conventional Group - Kenwood TK-3180 Function Reference

9 HORN ALERT

The TK-7180/ 8180 has a Horn Alert output terminal that
will function with the following features.
• Individual call using optional signaling (DTMF, 2-tone)
•
GID/Fix ID in LTR Trunking System
•
FleetSync Status No. 89
With this function enabled, a user can be alerted that the
transceiver has received a call since the horn will sound
and the headlights of the car will turn On. Therefore, the
user will notice that the transceiver has received a call
even if he/she is away from the transceiver.
Horn Alert is not necessary while driving the vehicle,
therefore you can configure the function to activate using
the Ignition terminal status. The following Horn Alert
terminal operations can be used when the Ignition Sense
terminal is connected to the Ignition terminal.
Ignition Sense.)
Table 9-1 Horn Alert Operation
Ignition
Ignition
Sense
Ignition only ON
On Power On
Ignition & SW
Power Off
Ignition only OFF
Power On
Off
Ignition & SW
Power Off
Power On
On
Power Off
Disable
Power On
Off
Power Off
You can use the Horn Alert function by installing the KAP-
2 (Optional) to the CN428 connector.
9.1 Switching the Horn Alert ON/
OFF
You can enable/disable the Horn Alert function by
switching the PF Horn Alert function.
!
Transceiver operation
# Enabling the Horn Alert Function
1. Press the PF Horn Alert key when the Horn
Alert function is disabled.
" " The Horn Alert function is enabled and
the icon lights.
Version: 1.11
(Refer to 8
Power Horn Alert
>
ON
>
OFF
>
ON Active
>
OFF
>
On
>
Off
>
ON Active
>
OFF
Function Reference
TK-7180/ 8180
# Disabling the Horn Alert Function
1. Press the PF Horn Alert key when the Horn
Alert function is enabled.
The Horn Alert function is disabled and the
" " icon disapperas.
TK-7180/ 8180
!
Configuration using KPG-89D
•
Assigning functions to the PF keys (Refer to
FPRG 6.8 Key Assignment.)
9.2 Horn Alert Operation using
Option Signaling and LTR ID
Activation conditions of the Horn Alert function are
different between the Conventional Group and a Trunking
system.
9.2.1

Conventional Group

The Horn Alert function is enabled when the PF Horn
Alert key is pressed and the "
Horn Alert function is enabled even if the Optional
Signaling is not configured to the channel.
When the Horn Alert function is enabled, the HOR
terminal is activated when receiving an individual call.
This terminal operates according to the Horn Alert Logic
Signal configuration. (Refer to 9.4.1 Horn Alert Logic
Signal.)
One of the following conditions must be met to activate
the Horn Alert in Conventional Group Mode.
" icon appears. The
37