Wide/Narrow; Optional Signaling; Busy Channel Lockout; Ptt Id - Kenwood TK-3180 Function Reference

16.2.7 Wide/Narrow

This function allows you to select the operational
bandwidth for the channel.
You can select Wide or Narrow using KPG-89D.
!
Configuration using KPG-89D
• Configuring the Wide/Narrow (Refer to FPRG
6.3.9 Wide/Narrow.)

16.2.8 Optional Signaling

You can use the Option Signaling to make an individual
call. (Refer to 18.2 Optional Signaling.)
You can configure the Optional Signaling for each
channel using KPG-89D.
!
Configuration using KPG-89D
• Configuring the Optional Signaling (Conventional
Group) (Refer to FPRG 6.3.10 Optional
Signaling.)

16.2.9 Busy Channel Lockout

This function automatically prevents the transmission so
as not to interfere other communications.
Busy Channel Lockout.)
You can configure the Busy Channel Lockout function for
each channel using KPG-89D.
!
Configuration using KPG-89D
•
Configuring the Busy Channel Lockout function
(Refer to FPRG 6.3.11 Busy Channel Lockout.)

16.2.10 PTT ID

This is the identification code transmitted when the PTT
switch is pressed and/or released.
You can configure the transmit timing of the PTT ID using
KPG-89D.
!
Configuration using KPG-89D
•
Configuring the PTT ID (Refer to FPRG 6.3.12
PTT ID.)
Version: 1.11
(Refer to 12
(Refer to 14 PTT ID.)
Function Reference
16 CONVENTIONAL GROUP

16.2.11 Beat Shift

This function eliminates the problems of the transceiver's
internal beat caused by internal oscillators. You can
enable/disable this function when the VGS-1 is installed
in the transceiver. (Refer to 1.8 Beat Shift.)
You can enable/disable the Beat Shift function using
KPG-89D.
!
Configuration using KPG-89D
•
Enabling/disabling the Beat Shift function for each
channel (Refer to FPRG 6.3.13 Beat Shift.)

16.2.12 Scan Add

You can select the channel to be added to the Scan List.
You can configure the Scan Add function using KPG-89D.
!
Configuration using KPG-89D
• Configuring the Scan Add function (Refer to FPRG
6.3.14 Scan Add.)

16.2.13 Compander

This function allows you to improve the transceiver sound
quality. (Refer to 1.7 Compander.)
You can enable/disable the Compander function using
KPG-89D.
!
Configuration using KPG-89D
•
Configuring the Compander function to each
channel (Refer to FPRG 6.3.15 Compander.)

16.2.14 Data

You can select the Channel to be used for Data
communications or Voice communications. Check the
Data checkbox to use the channel for data
communications.
You can configure the Data function using KPG-89D.
!
Configuration using KPG-89D
•
Configuring the Data function (Refer to FPRG
6.3.16 Data)
55