Short Message Stack; Short Message On Data Zone-Ch/Gid; Short Message Serial Output - Kenwood TK-3180 Function Reference

3. The " " icon blinks.
The received Short Message appears on the
display.
A user can scroll the message from right to left
when the Short Message is longer than 12
characters.
TK-2180/ 3180
TK-7180/ 8180
4. The display returns to the last display.
The " " icon becomes solid after reading the
Short Message. (Refer to 22.7 Stack.)
TK-2180/ 3180
TK-7180/ 8180
Note: To use serial communications, a user must prepare the
FleetSync compatible software or external devices.

22.4.3 Short Message Stack

This function is used to store the received Short Message
in the Stack memory. The transceiver can store a
maximum of 15 Short Messages.
When the message is stacked, the "
this case, a user can read the stored Status Message by
entering Stack Mode. (Refer to 22.7 Stack.)
You can configure the Caller ID to be stacked using KPG-
89D.
Note: The transceiver can stack a maximum of 15 Messages
(Status Message and Short Message).
Version: 1.11
" icon blinks. In
Function Reference
!
Configuration using KPG-89D
•
Configuring the Short Message Stack (Refer to
FPRG 6.12.2 General 2 tab - Short Message
Stack.)
22.4.4 Short Message on Data Zone-
CH/GID
This function allows the transceiver to automatically
change the Data Zone-CH/GID to send the Short
Message.
The transceiver automatically changes the channel to
Data Zone-CH/GID to send the Short Message. The
transceiver returns to the previous Zone-CH/GID when
transmission ends. This function allows the transceiver to
send data using the selected Zone-Channel/Group ID.
You can enable/disable this function using KPG-89D.
!
Configuration using KPG-89D
•
Configuring the Short Message on Data Zone-CH/
GID function (Refer to FPRG 6.12.3 Parameter
tab - Short Message on Data Zone-CH/GID.)

22.4.5 Short Message Serial Output

This function allows the transceiver to send the caller's
Fleet/ID from the transceiver's communication port when
the transceiver receives a Short Message.
The dispatcher can remote control the transceivers with a
PC. It can also retrieve the transceiver's status
information by connecting external devices.
You can enable/disable this function using KPG-89D.
!
Configuration using KPG-89D
• Configuring the Short Message Serial Output
(Refer to FPRG 6.12.2 General 2 tab - Short
Message Serial Output.)
22 FLEETSYNC
109