Beat Shift; Key Lock; Keypad Operation - Kenwood TK-3180 Function Reference

1.8

Beat Shift

This function eliminates the problems of the transceiver's
internal beat caused by internal oscillators.
The harmonic of the oscillator may interfere with
reception. You can prevent this problem by slightly
shifting the frequency of the oscillator.
You can enable/disable this function using KPG-89D.
You can enable and disable the Beat Shift function of the
VGS-1 when the transceiver has the VGS-1 installed .
!
Configuration using KPG-89D
•
Configuring the Beat Shift function (Refer to
6.3.14 Beat Shift and 6.4.5 Beat Shift.)
1.9

Key Lock

(TK-2180/ 3180 only)
This function allows you to disable the operation of the
transceiver's keys.
You can use this function to prevent the inadvertent
operation of the transceiver when wearing the transceiver
at your waist, etc.
You can enable/disable this function using KPG-89D.
Following is the list showing the operable keys and
inoperable keys when the Key Lock function is enabled.
Table 1-10 Functions that you can assign with the Keypad
Operation
Key Lock
Inoperable keys
Operable keys
Note:
" This function is only available for the TK-2180/ 3180.
" The Transceiver Password activates before this function
operates when the Transceiver Password is assigned. The Key
Lock function activates when the Transceiver Password is
disabled.
Version: 1.11
Keys
Selector
Top Side key
Front key
Mic Switch
PF Emergency key
PF Backlight key
PF Monitor key
PF Monitor Momentary key
PF Squelch Off key
PF Squelch Off Momentary key
PF Function key
PF Key Lock key
Function Reference
!
Transceiver Operation
#Enabling the Key Lock function
1. Press and hold the PF Key Lock key for more
than one second to enable the Key Lock
function.
"LOCKED" appears on the LCD and the
transceiver's keys are locked.
TK-2180/ 3180
TK-7180/ 8180
# Disabling the Key Lock function
1. Press the PF Key Lock key when the Key Lock
function is enabled.
The Key Lock function is disabled.
!
Configuration using KPG-89D
•
Assigning functions to the PF keys (Refer to 6.8
Key Assignment.)

1.10 Keypad Operation

You can configure the operation of the keypad according
to the desired usage of the transceiver.
You can assign the frequently used function to the
Keypad.
You can configure the Keypad Operation using KPG-89D.
The following is the list of functions that you can assign to
the transceiver with a Keypad.
Table 1-11 Available Functions
Configuration
You can directly select one of the OST
OST (Operator
List from OST List 1 - 40 by pressing the
Selectable Tone)
keypad of the transceiver.
You can directly select the channel by
Channel Entry
pressing the keypad of the transceiver.
1 BASIC FUNCTION
Operation
7