Horn Alert Mode - Kenwood TK-3180 Function Reference

9 HORN ALERT
9.4.3

Horn Alert Mode

This function allows you to configure the control method
to enable/disable the Horn Alert function.
You can configure Horn Alert Mode using KPG-89D The
following Horn Alert modes are available.
Table 9-7 Horn Alert Mode Type
Configuration
It resets the Horn Alert stand-by status when
the transceiver is turned OFF. The Horn
Current
Alert function is disabled when the
transceiver is turned ON.
The stand-by status of the Horn Alert
function is stored. Turn the transceiver OFF
while the Horn Alert function is in stand-by
Status Memory
mode. The Horn Alert function activates in
stand-by mode when turning the transceiver
ON again.
The transceiver activates the Horn Alert
Startup
function in stand-by mode.
!
Configuration using KPG-89D
•
Configuring Horn Alert mode (Refer to FPRG
6.7.1 Common-Page 1 tab - Horn Alert Mode.)
40
Description
Function Reference Version: 1.11