Changing The Ch/Gid; Channel Entry - Kenwood TK-3180 Function Reference

The Zone number decreases in steps of 1.
• Press and hold the PF Zone Down key for
more than one second.
The Zone number decreases in steps of 1
every 200 ms.
!
Configuration using KPG-89D
•
Assigning functions to the PF keys (Refer to 6.8
Key Assignment.)
2.5

Changing the CH/GID

You can change the CH/GID using the Selector, the PF
Zone Up key, and the PF Zone Down key.
Key Assignment.)
Although scan pauses if you change the CH/GID number
during scan, the transceiver resumes scanning in 1
second.
The unregistered CH/GID number is skipped when
changing the CH/GID number.
The Rollover Tone beeps when the CH/GID Number
reaches at the lowest number.
!
Transceiver Operation
# Using the Selector
• Turn the Selector clockwise.
The CH/GID number increases in steps of 1.
• Turn the Selector counterclockwise.
The CH/GID number decreases in steps of 1.
# Using the PF keys
• Press the PF CH/GID Up key.
The CH/GID number increases in steps of 1.
• Press and hold the PF CH/GID Up key for more
than one second.
The CH/GID number increases in steps of 1
every 200 ms.
• Press the PF CH/GID Down key.
The CH/GID number decreases in steps of 1.
• Press and hold the PF CH/GID Down key for
more than one second.
The CH/GID number decreases in steps of 1
every 200 ms .
!
Configuration using KPG-89D
•
Assigning functions to the PF keys (Refer to 6.8
Key Assignment.)
Version: 1.11
2.6
This function allows you to directly change the CH/GID
number.
You can specify the CH/GID number in the current Zone
by entering numbers after pressing the Channel Entry
key.
The transceiver automatically recognizes the highest
channel number. You can enter the digit number and
specify the channel.
Transceiver Operation
•
# When the Maximum Channel Number is Three
(Refer to 10
# When the maximum channel number is two digits
# When the maximum channel number is one digit
Function Reference
2 BASIC OPERATION

Channel Entry

Digits Number:
1. Press the PF Channel Entry key.
The transceiver enters Channel Entry Mode.
2. Enter the Channel number.
To enter channel 250, press [2], [5], and [0].
3. To enter channel 90, press [0], [9], and [0].
To enter channel 7, press [0], [0], and [7].
number:
1. Press the PF Channel Entry key.
The transceiver enters Channel Entry Mode.
2. Enter the Channel number.
To enter channel 90, press [9] and [0].
To enter channel 07, press [0] and [7].
number:
1. Press the PF Channel Entry key.
The transceiver enters Channel Entry Mode.
2. Enter the Channel number.
To enter channel 7, press [7].
13