Connect Id (Bot); Disconnect Id (Eot) - Kenwood TK-3180 Function Reference

TK-2180/ 3180
TK-7180/ 8180
2. Press [*] and [0].
The previously transmitted DTMF code appears.
Press [S] to cancel transmitting the code.
TK-2180/ 3180
TK-7180/ 8180
3. Press the PTT switch to make a voice call and
send the DTMF code.
Press [S2] to send only the DTMF code.

20.1.6 Connect ID (BOT)

This function allows the transceiver to transmit the DTMF
code configured to the Beginning of Transmit.
!
Transceiver Operation
1. Press the PF Autodial key while the transceiver is
in receiving mode.
The Autodial List display appears.
Version: 1.11
TK-2180/ 3180
TK-7180/ 8180
2. Press [*] twice.
The DTMF code configured to the Beginning of
Transmit appears.
Press [S] to cancel transmitting the code.
TK-2180/ 3180
TK-7180/ 8180
3. Press the PTT switch to make a voice call and
send the DTMF code.
Press [Side 2]/ [!] to only send the DTMF code.

20.1.7 Disconnect ID (EOT)

This function allows a user to transmit the DTMF code
configured to the End of Transmit.
!
Transceiver Operation
1. Press the PF Autodial key while the transceiver is
in receiving mode.
The Autodial List display appears.
Function Reference
20 DTMF
81