20 DTMF
TK-2180/ 3180
TK-7180/ 8180
2. Press [*] and [#].
The DTMF code configured to the End of Transmit.
Press [S] to cancel transmitting the code.
TK-2180/ 3180
TK-7180/ 8180
3. Press the PTT switch to make a voice call and
send the DTMF code.
Press [Side 2]/ [!] to only send the DTMF code.
20.2 Encode
You can configure the following functions that are linked
to the DTMF Encode using KPG-89D.
•
DTMF Speed
•
First Digit Delay Time
•
First Digit Time
•
* and # Digit Time
•
DTMF Hold Time
•
D Code Assignment
•
Sidetone
•
Manual Dialing
•
Store & Send
•
Auto Telephone
82
20.2.1 DTMF Speed
You can configure the DTMF automatic transmission
speed when automatically transmitting PTT ID, Autodial,
Store & Send, BOT, or EOT.
You can select the DTMF automatic transmission speed
(digit/sec) or configure the Digit Time.
You can configure the DTMF Speed using KPG-89D. The
following speed is available to select the DTMF automatic
transmission speed.
Table 20-3 DTMF Automatic Transmission Speed
Range
6 Digit/s
8 Digit/s
10 Digit/s
15 Digit/s
!
Configuration using KPG-89D
•
Configuring the DTMF Speed (Refer to FPRG
6.10.1 Encode tab - DTMF Speed.)
20.2.2 First Digit Delay Time
The First Digit Delay Time is the delay time between the
time that the repeater begins the transmissions and the
time that it ends the DTMF code transmission.
•
Automatically transmitting the DTMF tone using PTT
ID, Autodial, Store & Send, BOT, EOT, and Telephone
Disconnect
•
Transmitting the DTMF tone using the Keypad Auto
PTT function
The transceiver performs the unmodulated transmission
during the First Digit Delay Time.
You can configure the First Digit Delay Time using KPG-
89D.
!
Configuration using KPG-89D
•
Configuring the First Digit Delay Time (Refer to
FPRG 6.10.1 Encode tab - First Digit Delay Time.)
Function Reference
Digit Time
Gap Time
(Transmission)
(Silent)
83.3 ms
83.3 ms
62.5 ms
62.5 ms
50.0 ms
50.0 ms
33.3 ms
33.3 ms
Version: 1.11