Decode; Decoder 1 - 4 - Kenwood TK-3180 Function Reference

!
Configuration using KPG-89D
•
Configuring the Single Tone (Refer to FPRG
6.11.1 Encode tab - Single Tone.)
• Configuring a 2-tone Name (Refer to FPRG 6.11.1
Encode tab - 2-tone Name.)
• Configuring the 1st Tone (Refer to FPRG 6.11.1
Encode tab - 1st Tone.)
• Configuring the 2nd Tone (Refer to FPRG 6.11.1
Encode tab - 2nd Tone.)

21.3 Decode

There are four signaling options for each channel in the
Conventional Group: 2-tone 1, 2-tone 2, 2-tone 3, and 2-
tone 4.
You can configure the following functions to 2-tone 1, 2-
tone 2, 2-tone 3, and 2-tone 4.
•

Decoder 1 - 4

• A Tone/B Tone/C Tone/D Tone
• Auto Reset Timer
•
Clear to Transpond
•
Selective Call Alert LED
21.3.1 Decoder 1 - 4
You can configure 4 types of Decoders for each of 2-tone
1, 2-tone 2, 2-tone 3, and 2-tone 4. The transceiver can
receive the 2-tone Code configured to Decoder 1 - 4 at
the same time.
You can configure the following functions to each
Decoder.
!
Call Format
This function allows a user to select the A Tone, B Tone,
C Tone, and D Tone combination. The following
combinations are available.
Version: 1.11
Table 21-2 Format Combination List
Combination
1
2
3
4
5
6
7
8
!
Transpond/ Alert Tone
You can configure the operation of the transceiver
when it receives a call using 2-tone signaling.
Table 21-3 Transpond/ Alert Tone Operation
Transpond
No
Function Reference
Combination Pattern
• A-B (The transceiver
waits for receiving A
Tone and B Tone.)
• A-C (The transceiver
waits for receiving A
Tone and C Tone.)
• A-D (The transceiver
waits for receiving A
Tone and D Tone.)
• B-A (The transceiver
waits for receiving B
Tone and A Tone.)
• B-C (The transceiver
waits for receiving B
Tone and C Tone.)
• B-D (The transceiver
waits for receiving B
Tone and D Tone.)
• C-A (The transceiver
waits for receiving C
Tone and A Tone.)
• C-B (The transceiver
waits for receiving C
Tone and B Tone.)
• C-D (The transceiver
waits for receiving C
Tone and D Tone.)
• D-A (The transceiver
waits for receiving D
Tone and A Tone.)
• D-B (The transceiver
waits for receiving D
Tone and B Tone.)
• D-C (The transceiver
waits for receiving D
Tone and C Tone.)
• Long A (The transceiver
waits for receiving A
Tone.)
• Long B (The transceiver
waits for receiving B
Tone.)
• Long C (The transceiver
waits for receiving C
Tone.)
• Long D (The transceiver
waits for receiving D
Tone.)
Alert Operation
The transceiver does not perform
Off
any operation.
21 2-TONE
Standby
The transceiver
stands by for the
First Tone for 1
second and the
Second Tone for 3
seconds.
The transceiver
stands by for the
First Tone for 5
seconds.
91