Sub Display; Main Display; Zone Name - Kenwood TK-3180 Function Reference

3.5 Sub Display

The Sub display can display 3 characters. You can
select the items to be displayed on the Sub display
using KPG-89D.
• None (No items are displayed.)
• Zone number
• CH/GID number
• OST number
The following characters appear depending on the
situation.
表 3-5 Sub LCD List
Sub LCD
Display
•
CH/GID Recall
This icon appears when jumping to the
last received Zone-CH/GID using the
RCL
Channel/Group ID Recall function during
Scan.
Recall)
•
FleetSync Caller ID
This icon appears when the received
PTT ID (FleetSync ID) is displayed on
CID
the Main Display with the Caller ID
Display.
Display)
•
FleetSync SelCall ID
This icon appears when selecting the
I01
caller's ID of the received call in Stack
Mode.
•
FleetSync Status Message
This icon appears when selecting the
S01
Status Message in Stack Mode.
to 22.7 Stack)
•
FleetSync Short Message
This icon appears when selecting the
M01
Short Message in Stack Mode.
to 22.7 Stack)
•
Call Indicator
This icon appears when receiving a call
in Trunking System.
This CAL icon flashes when receiving
CAL
the LTR Group ID.
The CAL icon lights when receiving the
LTR Fix ID.
Indicator)
•
Home Channel
This icon appears when jumping to the
HC
Home Channel.
CH/GID)
•
Direct Channel
This icon appears when jumping to the
DR1 - DR5
Direct Channel.
CH/GID)
Version: 1.11
Function
(Refer to 23.7.16 CH/GID
(Refer to 22.1.1 Caller ID
(Refer to 22.7 Stack)
(Refer
(Refer
(Refer to 17.2.6 Call
(Refer to 2.7 Home
(Refer to 2.8 Direct
Sub LCD
Display
1 - 128
1 - 250
V01
01-100
FNC
OSP
! Configuration using KPG-89D
• Configuring the Sub display (Refer to 6.7.1
Common-Page 1 tab - Sub Display.)

3.6 Main Display

You can configure the following items for the Main
Display.
•

Zone Name

• Zone Name Text Length
• Channel Name
• GID Name
• Display Character
• Power-on Text
Note: Following characters are available.
(space) ! " # $ % & ' ( ) * + , - . / 0 1 2 3 4 5 6 7
8 9 : ; < = > ? @ [ \ ] ^ _ ` A B C D E F G H I J
K L M N O P Q R S T U V W X Y Z a b c d e f
g h i j k l m n o p q r s t u v w x y z { | } ~
3.6.1 Zone Name
This function allows you to assign a name to a Zone.
Function Reference
Function
•
Zone number
The selected Zone number appears.
•
CH/GID number
The selected CH/GID number appears.
•
VGS Recording Mode
The VGS recording Mode icon appears.
(Refer to 31 VGS)
•
List number display
The selected List number appears.
•
Function On
This icon appears when pressing the PF
Function key. The transceiver enters
Key Entry Mode until the 2nd Function
key is pressed.
•
Priority Channel Configuration Mode
This display appears when the
transceiver enters in Priority Channel
Configuration Mode.
表 3-6 Available characters
3 DISPLAY
21