Adjusting The Volume; Selecting A Zone And Channel - Kenwood NX-3200E3 User Manual

4
Repeat steps 2 and 3 to enter the entire password.
Press the [
●
the [ ] or [#] button to delete all numbers.
5
Press the [ ] or [ ] button to confirm the entry.
If you enter an incorrect password, an error tone sounds and the transceiver remains
●
locked.
The password can contain a maximum of 6 digits.
●

ADJUSTING THE VOLUME

Portable
Rotate the Power switch/ Volume control to adjust the volume.
Rotate clockwise to increase the volume and counterclockwise to decrease the
volume.
Mobile
Press the button programmed as [Volume Up] to increase the volume. Press the
button programmed as [Volume Down] to decrease the volume.

SELECTING A ZONE AND CHANNEL

1
Select the desired zone using the buttons programmed as [Zone Up]/ [Zone
Down]. Each zone contains a group of channels.
2
Select the desired channel using the buttons programmed as [Channel Up]/
[Channel Down]. Each channel is programmed with settings for transmitting and
receiving.
The transceiver may have names programmed for zones and channels. The zone
●
name and channel name can contain up to 12 and 14 characters respectively for
Portable transceivers, and up to 14 characters each for Mobile transceivers.
4
] or [#] button to delete an incorrectly entered number. Press and hold