Compander - Kenwood TK-3180 Function Reference

1 BASIC FUNCTION
TK-2180/ 3180
TK-7180/ 8180
3. Press [S].
The Squelch Level changes and the LCD returns
to normal display. "
TK-2180/ 3180
TK-7180/ 8180
Note:
" The Squelch Level operates only in Conventional Groups.
" Signalling is disabled while configuring the Squelch Level
" Following are the operations of the keys while changing the
Squelch Level.
Table 1-9 Key Operation
Key Name
Increase/decrease the digit number,
Squelch Level confirmation
Selector/ [ ]/ [ ]
* The List Selection key (Selector) is
enabled.
Exit mode.
[Side 1]/ [ ]
[S] Exit mode.
[A]
Increase/decrease the digit number,
[B]
Squelch Level confirmation
Increase/decrease the digit number,
[C]
Squelch Level confirmation
[Side 2]/ [!]
[0] - [9]
[*] Exit mode.
[#]
PTT switch Exit PTT Mode and transmission.
6
" icon is also turned Off.
Operation
Function Reference
!
Configuration using KPG-89D
•
Configuring the Squelch Level to the transceiver
(Refer to 6.7.4 Conventional tab - Squelch Level.)
• Assigning functions to the PF keys (Refer to 6.8
Key Assignment.)
Squelch Level key
The " " icon appears and current squelch level also appears.
Signaling is defeated while the squelch level is configured.
[ ]/ [ ], Selector
Press [ ] or turn Selector clockwise to increase the squelch level.
Press [ ] or turn Selector counterclockwise to decrease the squelch level.
The [S] key
Figure 1-4 Squelch Level
1.7

Compander

The Compander is used to improve the S/N ratio of a the
transmitted audio signal by compressing it at the
transmitting party and expanding it at the receiving party.
You can enable/disable this function using the KPG-89D.
The transmitting party and the receiving party must have
the same configuration to use this function.
!
Configuration using KPG-89D
•
Configuring the Compander function to each
channel (Refer to 6.3.15 Compander.)
• Configuring the Compander function to each GID
(Refer to 6.6.14 Compander.)
Version: 1.11