Sound; Tone Pattern; Power-On Tone; Control Tone - Kenwood TK-3180 Function Reference

4 SOUND

4.1

Tone Pattern

The following tones are available.
Table 4-1 Tone List
Tone Classification
The tone notifies you that the
transceiver is turned ON.

Power-on Tone

• Power-on Tone A
• Power-on Tone B
This tone sounds when operating
the transceiver.
• Key Beep A
• Key Beep B
• Key Beep C
• Key-entry Error Tone
• Rollover Tone

Control Tone

• Password Authorization Tone
• Queue Tone
• Free System Ringback Tone
• System Search Mode Tone
• Ringer Tone
• Priority Channel Tone
• Scan Stop Tone
This tone sounds to warn you.
• Warning Tone
• TOT Pre-alert Tone
• Battery Warning Tone
• PLL Unlock Tone
• Busy Tone
Warning Tone
• Timed Power-off Tone
• Delay Tone
• Intercept Tone
• Deny Tone
• System Search Tone
• System Search End Tone
This tone sounds when starting/
finishing the automatic transmission
Locator Tone
in Emergency Mode.
• Duration of Locator Tone
This tone sounds when a channel
becomes available or finishing the
transmission.
Sidetone
• PTT Proceed Tone
• VOX Proceed Tone
• PTT ID Sidetone
4.1.1 Power-on Tone
This tone sounds when the transceiver is turned ON or
OFF.
Table 4-2 Power-on Tone List
Function
This tone sounds when the
Power-on Tone A
transceiver is turned ON.
This tone sounds when pressing and
Power-on Tone B holding the Power switch for more
than 1 second.
24
Description, Type
Description
Function Reference
4.1.2 Control Tone
This tone sounds when accepting the operation.
Table 4-3 Control Tone List
Function
This tone sounds when the function
Key Beep A
is enabled by pressing the key.
This tone sounds when the function
Key Beep B
is disabled by pressing the key.
This tone sounds when writing data,
such as DTMF Memory or Test
Key Beep C
Mode adjustment value, to the
transceiver by pressing the key.
This tone sounds when denying the
operation activated by pressing a
Key-entry Error Tone key. This tone sounds when
pressing an inoperable key in
SelCall Entry/OST Select Mode.
This tone sounds when selecting the
Rollover Tone minimum Zone number or the
minimum CH/GID.
Password Authorization This tone sounds when the
Tone Password matches.
This tone sounds when searching an
available RIC repeater that can be
connected through the Auto TEL
function in Trunking System. This
Queue Tone
tone keeps sounding until an
available RIC repeater is found or
the Auto TEL function expires within
60 seconds.
This tone sounds when entering in
Free System Ringback
Free System Ringback Mode in
Tone
Trunking System.
This tone sounds when the
System Search Mode
transceiver enters in System Search
Tone
Mode in Trunking System.
This tone sounds when a repeater is
Ringer Tone available in Free System Ringback
Mode in Trunking System.
This tone sounds when the Scan
Priority Channel Tone
pauses on the Priority Channel.
The transceiver jumps to the Home
Channel or the Direct Channel when
the PF Home CH key or the PF
Scan Stop Tone
Direct key is pressed during Scan.
The transceiver emits this tone every
5 seconds while pausing the Scan.
Description
Version: 1.11