Conventional Group; Zone; Zone Name; Data Zone-Ch/Gid - Kenwood TK-3180 Function Reference

16 CONVENTIONAL GROUP

The Conventional Groups are groups of Simplex and
Semi-duplex Conventional Channels.
You can configure the Zone to the Conventional Group
using KPG-89D.

16.1 Zone

You can configure the following functions to the Zone
using KPG-91D.
•

Zone Name

•

Data Zone-CH/GID

•

Home Channel

•

Home Channel Operator Selectable

•

Optional Signaling Decode Condition

• Audio Control
•
Time-out Timer (TOT)
•
TOT Pre-alert
• TOT Rekey Time
• TOT Reset Time
•
BCL Override
•
Zone Add
• Scan List
16.1.1 Zone Name
The Zone Name function allows you to assign a name to
a Zone. (Refer to 3.6.1 Zone Name.)
You can configure the Zone Name using KPG-89D.
!
Configuration using KPG-89D
•
Configuring the Zone Name (Refer to FPRG 6.2.1
Zone Name.)
16.1.2 Data Zone-CH/GID
This function is used to separate the CH/GID for Data
communications from the CH/GID for Voice
communications. (Refer to 25.1.2 Data Zone-CH/GID.)
You can configure the Data Zone-CH/GID using KPG-
89D.
52
!
Configuration using KPG-89D
• Configuring the Data Zone-CH/GID (Refer to
FPRG 6.2.2 Data Zone-CH/GID.)
16.1.3 Home Channel
This function allows you to jump to the frequently used
Channel with a press of the key.
GID.)
You can configure the Home Channel using KPG-89D.
Note: You can only jump to the Channel in the same Zone.
!
Configuration using KPG-89D
• Configuring the Home Channel (Refer to FPRG
6.2.3 Home Channel.)
• Assigning functions to the PF keys (Refer to
FPRG 6.8 Key Assignment.)
16.1.4 Home Channel Operator
Selectable
This function allows the user to configure the Home
Channel. When this function is enabled, you can change
the Home Channel by selecting the channel to be
configured as the Home Channel and pressing and
holding the PF Home CH/GID key for more than 3
seconds.
You can enable/disable this function using KPG-89D.
!
Configuration using KPG-89D
• Configuring the Home CH Operator Selectable
function (Refer to FPRG 6.2.4 Home Channel
Operator Selectable.)
16.1.5 Optional Signaling Decode
Condition
You can select Carrier Decode or QT/DQT Decode as the
Decode condition.
You can configure the Optional Signaling Decode
Condition using KPG-89D.
!
Configuration using KPG-89D
• Configuring the Optional Signaling Decode
condition (Refer to FPRG 6.2.5 Optional Signaling
Decode condition.)
Function Reference
(Refer to 2.7 Home CH/
Version: 1.11