Alert Tone (Individual Call); Alert Tone (Other Selective Calls); Alert Tone (Paging Call); Alert Tone (Status/Short Message Call) - Kenwood TK-3180 Function Reference

Table 22-24 Auto Reset Timer Operation
Message Display
Type
"STM/SDM" appears on the display
when receiving a call. A user can
Fixed scroll the message when the
message is longer than 13
characters.
"STM/SDM" and SelCall ID is
Alternate displayed alternatively when
receiving a call.
Note: The display returns to the last display if a key is pressed
while the received message is displayed.
!
Configuration using KPG-89D
•
Configuring the Message Display Type (Refer to
FPRG 6.12.1 General 1 tab - Message Display
Type.)

22.9.20 Alert Tone (Individual Call)

Alert Tone (Individual Call) sounds when receiving an
Individual Call. You can select one of 8 tones configured
in Special Alert Tone.
Note: When "Infinite" is selected in the Special Alert Tone window
> Cycle, the transceiver stops emitting this tone when Auto
Reset Timer expires.
!
Configuration using KPG-89D
•
Configuring Alert Tone (Individual) (Refer to FPRG
6.12.2 General 2 tab - Alert Tone (Individual).)
22.9.21 Alert Tone (Other Selective
Calls)
Alert Tone (other Selective Calls) sound when receiving a
Selective Call. A user can select one of 8 tones
configured in Special Alert Tone.
Note:
" Alert Tone (other Selective Calls) is used for Group Call, Fleet
Call, Supervisor Call, and Broadcast Call.
" When "Infinite" is selected in the Special Alert Tone window >
Cycle, the transceiver stops emitting this tone when Auto Reset
Timer expires.
Version: 1.11
Operation
Function Reference
!
Configuration using KPG-89D
•
Configuring Alert Tone (Other Selective Calls)
(Refer to FPRG 6.12.2 General 2 tab - Alert Tone
(Other Selective Calls).)

22.9.22 Alert Tone (Paging Call)

Alert Tone (Paging Call) sounds when receiving a paging
call. A user can select one of 8 tones configured in
Special Alert Tone.
Note: When "Infinite" is selected in the Special Alert Tone window
> Cycle, the transceiver stops emitting this tone when Auto
Reset Timer expires.
!
Configuration using KPG-89D
•
Configuring Alert Tone (Paging Call) (Refer to
FPRG 6.12.2 General 2 tab - Alert Tone (Paging
Call).)
22.9.23 Alert Tone (Status/Short
Message Call)
Alert Tone (Status/Short Message Call) sounds when the
Status/Short Message data is stacked. A user can select
one of 8 tones configured in Special Alert Tone.
Note: When "Infinite" is selected in the Special Alert Tone window
> Cycle, the transceiver stops emitting this tone when Auto
Reset Timer expires.
!
Configuration using KPG-89D
• Configuring Alert Tone (Status/Short Message
Call) (Refer to FPRG 6.12.2 General 2 tab - Alert
Tone (Status/Short Message Call).)
22.9.24 Alert Tone
(Emergency Response)
Alert Tone (Emergency Response) sounds when the
Emergency Response function is configured to "Alert". A
user can select one of 8 tones configured in Special Alert
Tone.
Note: When "Infinite" is selected in the Special Alert Tone window
> Cycle, the transceiver stops emitting this tone when Auto
Reset Timer expires.
22 FLEETSYNC
123