Ta Busy Channel Lockout; Ta Key - Kenwood TK-3180 Function Reference

13 TALK AROUND
!
Configuration using KPG-89D
•
Configuring the Talk Around function (Refer to
FPRG 6.6.13 Talk Around.)
• Assigning functions to the PF keys (Refer to
FPRG 6.8 Key Assignment.)

13.2.1 TA Busy Channel Lockout

This function automatically restricts the transmission so
as not to interfere with other communications.
The transceiver can communicate using the Talk Around
function when the Home Repeater is out of transceiver
coverage. If a user transmits on a channel while other
groups are using that channel, the user may interfere with
their communications. This function prevents such
interference.
The "BUSY" icon appears on the main display if the PTT
switch is pressed while this function is enabled. In this
case, the transceiver emits the Warning Tone and does
not transmit. The transceiver emits the Warning Tone
until the PTT switch is released.
Repeater
Figure 13-2 TA Busy Channel Lockout
You can enable/disable this function using KPG-89D.
!
Configuration using KPG-89D
•
Configuring the TA Busy Channel Lockout function
(Refer to FPRG 6.5.16 TA Busy Channel Lockout.)

13.2.2 TA Key

This function allows you to enable/disable the PF Talk
Around key operation.
Disable the TA key so as not to allow the user to use the
Talk Around function.
You can enable/disable the TA key operation using the
KPG-89D.
48
Other group
transmitting
TA Busy Channel
Lockout
Function Reference
!
Configuration using KPG-89D
•
Configuring the TA key (Refer to FPRG 6.5.17 TA
Key.)
Version: 1.11