Talk Around; Conventional Group; Trunking System - Kenwood TK-3180 Function Reference

13 TALK AROUND

This function allows you to communicate to another
transceiver without using a repeater.

13.1 Conventional Group

This function allows you to transmit on the receive
frequency and Decode Signaling (QT/DQT) configured
for the selected channel.
!
Transceiver operation
# Enabling the Talk Around Function
1. Press the PF Talk Around key if the function is
disabled.
The " " icon appears and the Talk Around
function is enabled.
TK-2180/ 3180
TK-7180/ 8180
# Disabling the Talk Around Function
1. Press the PF Talk Around key if the function is
enabled.
The " " icon disappears and the Talk Around
function is disabled.
Note:
" The Talk Around function is disabled when changing the Zone-
CH/GID when the Talk Around function is enabled.
" The Talk Around function is disabled when moving to the data
channel using the DTC or the Data PTT while the Talk Around
function is enabled on the Voice Channel. The Talk Around
becomes active when the transceiver moves to the Voice
channel.
" This function does not work in Emergency Mode.
!
Configuration using KPG-89D
•
Assigning functions to the PF keys (Refer to
FPRG 6.8 Key Assignment.)
Version: 1.11

13.2 Trunking System

When the Talk Around function is enabled, you can
transmit on the receive frequency and Encode ID of the
Home Repeater of the selected Zone.
Transmit
Frequency A
Transceiver 1
You can enable/disable this function for each Group ID
using KPG-89D.
The " " icon appears on the Group ID that Talk Around
is enabled on. You cannot disable the Talk Around
function using the PF Talk Around key.
You can enable/disable the Talk Around function on the
Group ID that the Talk Around function is not enabled
using the PF Talk Around key. You can enable/disable
the Talk Around function for each Zone.
TA Key.)
Note:
" The Talk Around function will be automatically disabled when the
Zone/GID is changed if the Talk Around function is enabled.
" You can configure to enable/disable the PF Talk Around key for
each Zone.
!
Transceiver operation
# GID that the Talk Around Function is Enabled:
1. Select the GID that the Talk Around function is
enabled on.
The "
function is enabled.
# GID that the Talk Around Function is Disabled:
1. Press the PF Talk Around key.
The "
function is enabled.
2. Press the PF Talk Around key.
The "
function is disabled.
Function Reference
Transmit
Frequency B
Repeater
Transmit Frequency B
Transceiver 2
Figure 13-1 Talk Around
(Refer to 13.2.2
" icon appears and the Talk Around
" icon appears and the Talk Around
" icon disappears and the Talk Around
47