Long Message Function; Sending The Long Message; Receiving The Long Message - Kenwood TK-3180 Function Reference

22 FLEETSYNC

22.5 Long Message Function

This function allows the transceiver to transmit/receive a
maximum of 4096 characters.
With this function, a user can reliably send information to
the transceiver.
Note: You must select Optional Features window > Common-
Page 3 > COM port 1 - 3 > "Data".

22.5.1 Sending the Long Message

You can send the Long Message from a PC. A user is not
allowed to send the Long Message from the transceiver.
!
Transceiver Operation
1. Send the serial command to the transceiver from
the PC.
The transceiver sends the Long Message.
TK-2180/ 3180
TK-7180/ 8180
# When the Long Message is properly sent to the
receiving party:
"COMPLETE" appears on the display.
TK-2180/ 3180
TK-7180/ 8180
110
# When the Long Message is not properly sent to
the receiving party:
"NO REPLY" appears on the display.
TK-2180/ 3180
TK-7180/ 8180
# When the Long Message is not sent properly
since the receiving party is busy:
"BUSY" appears on the display.
TK-2180/ 3180
TK-7180/ 8180

22.5.2 Receiving the Long Message

The received Long Message data can be transferred
PC. This message is sent when the transceiver is
connected to a PC or the KDS-100 (MDT). Refer to the
PC Interface manual for details.
Note: To use serial communications, a user must prepare the
FleetSync compatible software or external devices.
!
Transceiver Operation
1. The "RECV DATA" appears on the main display
when the transceiver starts receiving data.
Function Reference
to a
Version: 1.11