14 PTT ID
" You can select the ID configured in FleetSync window
tab for List 1 - 100 only.
!
Configuration using KPG-89D
•
Configuring the PTT ID (Conventional Group)
(Refer to FPRG 6.3.12 PTT ID.)
•
Configuring the PTT ID (Trunking System) (Refer
to FPRG 6.6.8 PTT ID.)
14.3 Restricted ID in TA
This function disables the PTT ID transmission even
when the PTT switch is pressed and released in the Talk
Around Mode.
You can use this function when the PTT ID is not required
to make a direct communication between transceivers.
You can enable/disable the Restricted ID in TA function
using KPG-89D.
Note:
This function is available only in Conventional Group.
!
Configuration using KPG-89D
•
Configuring the Restricted ID in TA function (Refer
to FPRG 6.7.4 Conventional tab - Restricted ID in
TA.)
50
>
ID List
Function Reference
Version: 1.11