Basic Operation; Turning The Transceiver On/Off; Turning The Transceiver On - Kenwood TK-3180 Function Reference

2 BASIC OPERATION

2.1

Turning the Transceiver ON/

OFF
2.1.1 Turning the Transceiver ON
You can turn the transceiver ON/OFF by pressing the
Power switch.
You can also turn the transceiver ON using the Ignition
Sense terminal. (Refer to 8 Ignition Sense.)
!
When Data is Written in the Transceiver and
No Password is Configured:
1. Press the Power switch.
The Power-on Tone A sounds for 500 ms and all
LCD segments light.
TK-2180/ 3180
TK-7180/ 8180
The Power-on Text appears for 2 seconds if the
Power-on Text is configured.
Power-on Text.)
TK-2180/ 3180
TK-7180/ 8180
The CH/GID Name or Zone-CH/GID number
appears on the display.
Character.)
Version: 1.11
(Refer to 3.6.6
(Refer to 3.6.5 Display
Function Reference
TK-2180/ 3180
TK-7180/ 8180
!
If the Password is Configured:
1. Press the Power switch.
"Password" appears on the LCD when turning the
transceiver ON. (Refer to 5.1 Transceiver
Password.)
TK-2180/ 3180
TK-7180/ 8180
2. Enter the password.
The Power-on Tone A sounds for 500 ms and all
LCD segments light when the correct password is
entered.
TK-2180/ 3180
TK-7180/ 8180
The Power-on Text appears for 2 seconds if the
Power-on Text is configured.
Power-on Text.)
(Refer to 3.6.6
11