Autodial List Selection; Redial - Kenwood TK-3180 Function Reference

20 DTMF
!
Configuration using KPG-89D
•
Assigning functions to the PF keys (Refer to
FPRG 6.8 Key Assignment.)

20.1.4 Autodial List Selection

This function allows a user to select the DTMF code
registered in the Auto Dial Memory List and transmit it.
The user can use this function when the Store & Send
function is disabled.
You can enable/disable the Store & Send function using
KPG-89D.
!
Transceiver Operation
1. Press the PF Autodial key.
The transceiver enters the Shortcut Entry Mode of
the List Selection.
The minimum List number appears immediately
after the transceiver is turned ON. Otherwise, the
previously selected List number appears.
Select "DTMF (Autodial)" in Key Assignment
window > General tab > Keypad Operation to
disable the PF Autodial key.
TK-2180/ 3180
TK-7180/ 8180
2. Select the Autodial List.
• Common
Press [B]/ [C].
• TK-2180/ 3180
Turn Selector.
• TK-7180/ 8180
Press [ ]/ [ ].
*1
When the List Selection Key (Selector) is enabled.
80
*1
*1
TK-2180/ 3180
TK-7180/ 8180
3. Press the PTT switch to make a voice call and
send the DTMF code.
Press [S2] to send only the DTMF code.
TK-2180/ 3180
TK-7180/ 8180
!
Configuration using KPG-89D
•
Configuring the Store & Send function (Refer to
FPRG 6.10.1 Encode tab - Store & Send.)

20.1.5 Redial

This function allows a user to re-transmit the last
transmitted DTMF code.
!
Transceiver Operation
1. Press the PF Autodial key while the transceiver is
in receiving mode.
The Autodial List display appears.
Function Reference Version: 1.11