Ost Table; Standard Qt - Kenwood TK-3180 Function Reference

19 OST

19.4 OST Table

This function allows you to configure QT/DQT Decode/
Encode pair for OST. You can configure a maximum of
40 pairs. You can configure the following functions in the
OST Table.
Table 19-1 OST Table Configuration
OST Table
You can assign name to the OST
QT/DQT Encode/Decode pair. You
can enter a maximum of 12
OST Name
characters.
"TONE 1" - "TONE 40" appears
when no OST Name is configured.
You can configure the QT/DQT
Decode code. The following QT/
QT/DQT Decode DQT Decode range is available.
QT: 67 - 254.1 Hz/ in steps of 0.1 Hz
DQT: 000N - 777N, 000I - 777I
You can configure the QT/DQT to
make a call. The following QT/DQT
QT/DQT Encode Encode range is available.
QT: 67 - 254.1 Hz/ in steps of 0.1 Hz
DQT: 000N - 777N, 000I - 777I
!
Configuration using KPG-89D
• Configuring a OST Name (Refer to FPRG 6.7.4
Conventional tab - OST Name.)
• Configuring the QT/DQT Decode (Refer to FPRG
6.7.4 Conventional tab - QT/DQT Decode.)
• Configuring the QT/DQT Encode (Refer to FPRG
6.7.4 Conventional tab - QT/DQT Encode.)

19.5 Standard QT

You can configure the 39 tones specified in EIA-603.
!
Configuration using KPG-89D
• Automatically configuring the Standard QT (Refer
to FPRG 6.7.5.Conventional tab - Standard QT
button.)
76
Function
Function Reference Version: 1.11