Kenwood TK-3180 Function Reference page 164

28 VOX
Table 28-2 VOX Proceed Tone Operation
VOX Proceed Tone
The transceiver emits the Proceed Tone
Check (Enable)
when the VOX function is enabled.
The transceiver does not emit the
Uncheck (Disable) Proceed Tone even if the VOX function
is enabled.
Note: The transceiver does not emit the Proceed when DTMF/ 2-
tone/ FleetSync is used. If the Sidetone is configured to
DTMF/ 2-tone/ FleetSync, the transceiver does not emit the
VOX Proceed Tone.
!
using
Configuration
•
Configuring the VOX Proceed Tone (Refer to
FPRG 6.7.4 Conventional tab - VOX Proceed
Tone.)
152
Operation
KPG-89D
Function Reference Version: 1.11