20 DTMF
20.3.5 Clear to Transpond
This function allows the transceiver to wait before
performing the Transpond function until the channel is
released by another user.
You can enable/disable the Clear to Transpond function
using KPG-89D.
Note: This function works only in Conventional Group.
!
Configuration using KPG-89D
•
Configuring the Clear to Transpond (Refer to
FPRG 6.10.2 Decode tab - Clear to Transpond.)
20.3.6 Selective Call Alert LED
This function makes the SelCall Alert LED blink when
receiving a code.
This function allows a user to monitor a call when he/she
is away from the transceiver.
You can enable/disable the Selective Call Alert LED using
KPG-89D.
(Refer to 22.2 Selective Call Function.)
!
Configuration using KPG-89D
•
Configuring the Selective Call Alert LED (Refer to
FPRG 6.10.2 Decode tab - Selective Call Alert
LED.)
20.4 Autodial
You can configure the following functions that are linked
to Autodial using KPG-89D.
•
Autodial List
•
Autodial Programming
20.4.1 Autodial List
This function allows you to configure the DTMF code
used in Autodial function.
You can configure the Autodial List using KPG-89D.
Below is a list of configuration items for the Autodial List.
Table 20-9 Table 20-9 Autodial List Configuration
Autodial List
You can assign a name to the DTMF
Name
code. You can enter a maximum of 12
characters.
You can enter the DTMF code to send.
Code
You can enter a maximum of 16 digit
numbers.
86
Operation
Function Reference
!
Configuration using KPG-89D
•
Configuring the Name (Refer to FPRG 6.10.3 Auto
Dial List tab - DTMF Name.)
•
Configuring the Code (Refer to FPRG 6.10.3 Auto
Dial List tab - Code.)
20.4.2 Autodial Programming
This function allows you to configure, change, or delete
the DTMF Autodial List using the PF keys.
You can change the Name and the DTMF code by
pressing the PF Autodial Programming key.
You can enable/disable the Autodial Programming
function using KPG-89D.
Note: The key is activated as below when the List name or the
DTMF code is entered.
Table 20-10 Key Operation
Key Name
] Up/Down of the entered channel
Selector/ [
]/ [
Exit Mode.
[Side 1]/ [
]
[S]
Move to next item.
Press: Delete a number.
[A]
Hold: Delete all numbers.
[B]
[C]
Confirm the entered character.
[Side 2]/ [!]
[0]
(Space)/ 0
[1]
1
[2]
A/ B/ C/ 2
[3]
D/ E/ F/ 3
[4]
G/ H/ I/ 4
[5]
J/ K/ L/ 5
[6]
M/ N/ O/ 6
[7]
P/ Q/ R/ S/ 7
[8]
T/ U/ V/ 8
[9]
W/ X/ Y/ Z/ 9
[*]
Confirm the entered character.
Press: Delete a number.
[#]
Hold: Delete all numbers.
PTT switch
Exit PTT Mode and transmit.
Operation
Version: 1.11