Remote Ch/Gid List; Jumping To The Specified Zone-Ch/Gid Using The External Device Connected To The Transceiver - Kenwood TK-3180 Function Reference

27 REMOTE CH/GID LIST

This function allows the transceiver to jump to one of 15
Zone-CH/GIDs using the CH/GID Select A - CH/GID
Select D ports.
27.1 Jumping to the Specified
Zone-CH/GID using the
External Device Connected
to the Transceiver
The transceiver jumps to the Zone-CH/GID configured in
the Remote CH/GID when the status of CH/GID Select A
- CH/GID Select D ports becomes
The selected CH/GID appears on the display.
Table 27-1 Number in the Remote CH/GID List According to
CH/GID Select A - D Port Status
Target CH/
CH/GID CH/GID
GID
Select D Select C
Current
High High
CH/GID
Remote
CH/GID High High
No. 1
Remote
CH/GID High High
No. 2
Remote
CH/GID High High
No. 3
Remote
CH/GID High
No. 4
Remote
CH/GID High
No. 5
Remote
CH/GID High
No. 6
Remote
CH/GID High
No. 7
Remote
CH/GID Low High
No. 8
Remote
CH/GID Low High
No. 9
Remote
CH/GID Low High
No. 10
Version: 1.11
low.
AUX Input Port
CH/GID CH/GID
Select B Select A
High High
High Low
Low High
Low Low
Low High High
Low High Low
Low Low High
Low Low Low
High High
High Low
Low High
Function Reference
Target CH/
CH/GID CH/GID
GID
Select D Select C
Remote
CH/GID Low High
No. 11
Remote
CH/GID Low
No. 12
Remote
CH/GID Low
No. 13
Remote
CH/GID Low
No. 14
Remote
CH/GID Low
No. 15
Note: You cannot register the Zone-CH/GID whose the CH/GID
data is not configured to the Remote CH/GID List.
!
Configuration using KPG-89D
•
Configuring the AUX Input (Refer to FPRG 6.15.2
AUX tab.)
•
Configuring the Remote CH/GID List (Refer to
FPRG 6.15.3 Remote Zone-CH/GID tab.)
AUX Input Port
CH/GID CH/GID
Select B Select A
Low Low
Low High High
Low High Low
Low Low High
Low Low Low
149